Preloader
x
x
loading projects
Pure BrillianceViews : 72

PG PURE BRILLIANCE BRUSH ON CLEAR GLAZE

Product Features
Kiln Required Yes
Cone Firing Range 06
Finish Clear Gloss
Coverage 2 coats
Food Safe Yes
Nontoxic Yes
Available Sizes 4 oz., pint, gallon, 3.5 gallon
Item # : 26394
Share:

Brush-On Formula:

  1. Mix clear glaze with palette knife.
  2. Sponge Application: Dab a clean sponge into glaze and dab one coat over colors on surface of bisque to cover. After the sponged coat has dried thoroughly, load glaze brush with glaze and brush on two coats. Allow to dry between coats.
  3. Brush Application: Load a glaze brush with glaze and apply two flowing coats. Let dry between coats.
  4. Let ware dry thoroughly. Set ware securely on clean, sharp stilts in kiln. Fire to cone 06.


Dipping Glaze Formula: 

Initially mix with electric mixer for no more than 2 minutes. A stainless steel wire whisk can be used to stir glaze periodically.

Submerge a TL 497 Viscosity Cup into tank and fill with glaze. As you lift cup from glaze, begin timing. Stop timing when stream of glaze begins to break. A range of 19-24 seconds is normal. Add small amounts of water as needed (4 oz. at a time).

Hold ware with hands or dipping tongs. If using hands, wear protective gloves. As you remove ware shake away any drips or runs. Do not finger sand the piece as this can cause airborne dust.

If necessary on larger piece, dip unglazed portion, slightly overlapping glazed area for full coverage. Let dry. 

Use a Fan Glaze Brush to touch up any missed areas after ware dries. Use a Palette Knife to shave off drips or runs.

Set ware on clean, sharp stilts in kiln. Fire to shelf cone 06.

Dipping Glaze Formula:

When you receive Pure Brilliance Clear Dipping Glazes in a 1 gallon or 3.5-gallon container you will notice very minimal settling, which is uncharacteristic of clear dipping glaze formulas. The glaze will arrive in a gel-like state and appear thicker than dipping glazes of the past. This gel formula is intentional and is by design. The gel-like state helps to keep the glaze in suspension during shipment, making it easier for you to mix in preparation of use.

The viscosity range for Pure Brilliance Clear Dipping Glaze is 19-24. Please use this range as a guideline. Your personal number may vary. We strongly encourage you to try the glaze in a thicker state during your initial use than you may have become accustomed to with other dipping glazes. Due to the new technology used to develop this glaze it will perform very well when it appears thicker than glazes of the past.

Less water in the glaze will eliminate overlap lines, keep black detail lines looking much sharper with no bleeding, and improve overall drying time.

Pure Brilliance Clear Dipping Glaze is much more forgiving than any nontoxic glaze on the market. It has been formulated  to not over accumulate on pieces making over-application issues almost non-existent. Application results can now be consistent from person to person with varying dipping techniques using the same dipping tank of glaze.

Pure Brilliance Clear Dipping Glaze has an extended “open” time immediately after dipping to allow you to shake off drips and runs, but has an overall faster drying time helping you and your staff get the kilns loaded quickly with less work.

Pure Brilliance Clear Dipping Glaze dries to a manageable but stable state allowing you to load kilns without the glaze flaking off in your hands. No more glazed starved plate rims! Stable drying also means no dust and mess in your studio!

Copyright © 2018 Duncan Ceramics